Filter
Top Products
16
Operation
USING HI/LO
T
RANSMITTER POWER
You can set the radio transmit power to
0.5W or 1.0W. The transmit power of
channel 8–14 is fixed at 0.5W only
(FRS channel). To select 1.0W transmit
power, make sure that the radio is not
on channels 8–14 and then press
MENU until Lo appears. If you select
OFF, the radio transmit power is 1.0W;
select
ON to set the transmit power to
0.5W. If you do not press any key within
20 seconds after entering this mode,
the radio exits the Menu without saving
any changes.Ô
USING COURTESY TONE
You can set your radio so the person
you are communicating with will hear a
tone when you finish transmitting. To
turn on the radio courtesy tone, press
MENU repeatedly. appears and ON/
OFF flashes on the display. ON appears
when the courtesy tone is on and
OFF
appears when the courtesy tone is off.
Press or to turn the courtesy
tone on or off. Press
PTT to store the
setting.
Ô NOTE Ô
The Hi/Lo transmit
selection is not available
when using FRS
Channels 8–14.