Filter
Top Products
27 Beyond the Basics
•When you enter a frequency into a channel, the
scanner automatically turns on the delay
function and DLY appears. When delay is
turned on, the scanner automatically pauses
scanning 2 seconds after the end of a transmis-
sion before scanning proceeds to the next
channel. To turn the function off or on, press
FUNC + DLY.
•If you enter a frequency that has already been
entered elsewhere, the scanner sounds an
error tone and displays the channel that was
duplicated. If you entered the frequency by
mistake, press
.
/CLR then enter the correct fre-
quency. To enter the frequency anyway, press E
to accept.
To program the next channel in sequence, press
FUNC + PGM and repeat Steps 2 and 3.
To program the scanner with your local Skywarn
frequency, use the supplied frequency guide to
find the frequency for your area, and then repeat
Steps 1-3 to program Channel 200 with that fre-
quency. For more information, see “Skywarn” on
Page 36.