Filter
Top Products
CALLER-ID:
During an incoming call, the number of the calling party comes on the
display of your handset(s). Each handset has a memory-capacity of 20
numbers.
Attention: It might be possible that you have to subscribe to this fea-
ture.
Caller record review:
If there is a new call (not yet reviewed), the Message Icon will
light.
1. In standby mode, press .
2. Press (button 5) of (button 8) to review the caller record.
3. Press to exit.
Once the caller-list is reviewed, the Message Icon (on that particular
handset) will turn off.
Call back from caller record:
Once you have found the desired name/number, press to dial out
that number.
Store the number in memory:
1. press and use and to look for the required number
2. press and keep it pressed until after about 2 seconds the
symbol lights
3. press one of the 10 key’s (0-9) of the keyboard
CLIP on Call W
aiting (only FSK based systems)
If you have subscribed to this service, the telephone will show the
phone number of another incoming call while you are talking on the
phone.
If you press , the current call will be put on hold and you could talk
with this second caller. Subsequent presses of button will toggle
you between these 2 callers.
9