Filter
Top Products
INSTALLATION
1. Connect the output plug of the mains adapter to the socket on the
bottom of the base unit and the mains adapter to the wall mains
supply.
2. Plug the mains adapter of the charger(s) (if supplied) into the wall
mains supply.
3. Install 2 AAA batteries, observing their polarities, into the battery
compartment on the (each) handset.
4. Slide the battery door(s) firmly into place.
5. Connect the telephone lead to the telephone socket on the bottom
of the base unit and to the wall phone socket.
6. Place the handset(s) on the base unit (or on the charger(s)) and let
the batteries charge for a full 14 hours before using.
CHARGE THE HANDSET:
When an empty battery icon is displayed, the batteries need rechar-
ging. When you are talking on the phone, you'll also hear a series of
short beeps as warning.
CAUTION:
Use only the mains adapter(s) supplied with this telephone. Incorrect
adapter polarity or voltage can seriously damage the unit.
Use only the charger(s) supplied with this telephone. Incorrect charger
type can cause damage to the handset(s).
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCOR-
RECT TYPE. Refer to the original type supplied with this telephone.
HANDSETNUMBER:
In idle state the handset LCD display’s “HS-x” were x represents the
handsetnumber “1”, “2”, “3” or “4”.
7