Filter
Top Products
USAGE
INCOMING:
1. lift the handset and press to answer the call
Refer to page 13 in case you want to change the ringersignal.
OUTGOING:
standard:
1. press and wait for the dialtone
2. key in the telephonenumber through the keyboard
blockdialing:
1. key in the number (use button to correct)
2. press
3. the number will be dialed
last number redial:
1. press
2. press , the last dialed number will be redialed (or press for
over one second to return to the idle state)
The capacity of the last dialed number is 20 digits.
ON HOOK:
1. press button or put the handset into the base or into the
charger pod to go on hook.
RECEIVING VOLUME:
Press during the conversation to increase or decrease the recei-
ving volume. This setting will be kept in memory.
MUTE:
1. Press button to mute the call. Symbol is turned on. The
caller is not be able to hear you but you are still able to hear the
caller.
2. Press button again to unmute the call.
CALL TIMER:
After about 10 seconds and till about 5 seconds after the call is ended,
the display shows the call duration.
8