Filter
Top Products
RSS 2000 V3.0.2 Upgrade Guide
15
Existing Systems (Software upgrade only, no new
installation)
Preparation before Upgrade
Obtain the 3.0.2 upgrade package and activation keys from the Polycom website or
your local service center. Save the software and keycodes on your PC (For more details,
please see the RSS 2000 Version 3.0.2 User Guide).
Table 5 Upgrade package definition
Package Name Description
RSS 2000.3.0.2 . pkg With full function except PHP V5.2.6 .
RSS 2000 PHP V5.2.6. pkg Running base on RSS 2000 V3.0.2 or above version.
Table 6 Keycode definition
Package Name Description
K-keycode
Option Activation (Basic, Multicast, Clustering)
U-keycode
New Version activation (Will not affect the current installed
options)
• For an RSS 2000 running version 1.0, K-keycode and U-keycode are both needed.
• For an RSS 2000 running version 2.0, only the U-keycode is needed. (The U-keycode
permits the upgrade to the new software version, but does not control options activation. For
additional options, an appropriate K-Keycode must be purchased).
• For an RSS 2000 running version 3.0 or 3.0.1, there is no need to perform any activations
whatsoever in order to upgrade to version 3.0.2.
How to generate keycodes:
Please refer to the instructions and screenshots in the
New Systems – New Installations
section above.
• Before the upgrade, please check the currently installed software version. There is a different
process for each upgrade as noted above.
• Keep the RSS 2000 powered on and connected to the network during the upgrade.