Filter
Top Products
RSS 2000 Getting Started Guide & Release Notes – Version 3.0.2
4
5 Go to system configuration->IP setting and modify the IP address. You can set a
static IP or choose DHCP. Click the save button and then reset the system.
Changing the initial IP address via an RS232 Console or Telnet
Another option to modify the IP address of the RSS 2000 is using the RS232 console.
Connect to the RS232 port – and activate the console (9600, 8bits)
Login: polycom (or any administrator password)
When you first login to the console, you will see the current IP address of the system.
Help
# ? – show all available commands
Changing the IP Address
# set lan1 static 172.21.100.20 mask 255.255.224.0 [gw 172.21.96.254]
Reset Password (back to polycom)
A user may reset the password of the administrator to the default of ‘polycom’
# reset password