Polycom IP3000 Telephone User Manual


 
SoundStation IP 3000 Installation Instructions and User’s Guide
7
To return to the resting display, press
the Exit key. (Or, to access the menu
where you can select another area,
press the Menu key.)
1 Press the Menu key.
2 Press the Up or Down scroll key to
highlight Settings.
3 Press the Select key.
Leaving the Phone Book
Settings
Adjusting the LCD Contrast
Entering the Settings Area
1 From within the Settings area, press
the Up or Down scroll key to highlight
Contrast.
2 To adjust the LCD’s contrast,
press the
-
or + soft key.
Your SoundStation IP’s language is set to
English. In future versions, other language
settings will be available.
Viewing the Language Setting
1 From within the Settings area, press
the Up or Down scroll key to highlight
Ringer.
2 To display the list of ringer sounds,
press the
Change soft key.
3 Press the Up or Down scroll key
to highlight one of the five sounds
named. Or, if you would prefer the
SoundStation IP not to ring out loud,
highlight Ringer Off at the bottom of
this list.
4 To hear the ringer sound you have
highlighted, press the
Listen soft key.
5 Repeat the above steps until you have
found the ringer sound you want to
keep.
6 Press the Save soft key.
Selecting a Ringer Sound, or Turning the Ringer Off
1 From within the Settings area, press
the Up or Down scroll key to highlight
Time Format.
2 To display the time in a 12-hour or
24-hour format, press the corresponding
12 Hr or 24 Hr soft key.
Changing the Time Format