Filter
Top Products
Using the Basic Features of Your SoundPoint IP 550 Phone
3 - 17
5. Select the Enable soft key to confirm call forwarding.
Select the Exit soft key to cancel any changes.
The idle display returns with a moving arrow as the line label to confirm
call forwarding is enabled.
To disable call forwarding:
1. Do one of the following steps:
— Press and select Features > Forward...
— Press the Forward soft key from the idle display.
2. (Optional) If multiple lines are configured on your phone, select the line
to forward from the list using and .
3. Using and , select the forwarding type you want to change and
then press the Select soft key.
4. Press the Disable soft key to turn off call forwarding.
The idle display returns and the regular icon appears as the line indicator.
Dynamic Forwarding
To forward an incoming call to another party:
1. With the phone ringing, press the Forward soft key.
2. Enter a number to forward the incoming call to.
3. Press the Enable soft key.
The incoming call is forwarded to the other party. If call forwarding is
disabled, all future calls will not be forwarded and forwarding will remain
disabled.
Note
You can also enter the SIP URL or IP address. For more information on using a SIP
URL or IP address, refer to To place a call using the handset: on page 3-3