Filter
Top Products
LinkPlus Interface Guide: Siemens Hicom/HiPath optiset for SpectraLink e340/h340/i640 Wireless Telephones
PN: 1725-36143-001_K.doc
8
Certain characters may be used by the Hicom CS that are not
implemented in the handset. Flashing characters are not implemented
on the handset, nor is rolling or scrolling of text.
Although the optiset E Basic telephone does not have a display, any
display information sent by the Hicom CS will be displayed on the
handset.
Wireless Telephone Icons
▪ ▪ 3 ▪ ▪ ▪ ▪ ▪ ▪ The line indicators are associated with line access keys. In the
diagram, line 3 is active.
◄ ► A left or right arrow is displayed when the screen can be toggled
either left or right to display more characters as described above.
▲ ▼ Up and down arrows are displayed when the menu has additional
options above or below what is shown in the display area.
The battery icon displays and a soft beep will be heard while the
Wireless Telephone is in use whenever the Battery Pack charge is low.
User has 15–30 minutes of Battery Pack life left.
The signal strength icon indicates the strength of the signal and can
assist the user in determining if the handset is moving out of range.
The voicemail icon indicates that you have a new voicemail message
Low battery This message will display and an alarm will sound while the Wireless
Telephone is in standby mode and the Battery Pack is critically low.
The Wireless Telephone cannot be used until the Battery Pack is
charged.
The download icon indicates that the handset is downloading code.
This icon only appears while the handset is running the over-the-air
downloader. It appears to the right of the Signal Strength icon in the
same location as the Voicemail icon.
[Melody] A melody is played after the Wireless Telephone is powered on for
the first time following a completed charge (Charge Complete).