Filter
Top Products
8
Plantronics Voyager 510S Setup Guide
4. Slide the Handset Lifter Arm under the handset until the lifter base touches
the side of the phone.
5. Slide the Lifter up to where it nearly touches the handset earpiece and hold.
Slide Lifter under
handset, then up
toward the ear piece
B. Determine Lifter position and height setting
Lifter viewed
from back
Start with Lifter
Height Switch in
lowest position
Handset Lifter Arm
To determine the lifter position and height setting, you will rst need to power the
headset on and t the headset.
1. Press and hold the power/mute button on the headset for 3 seconds until the status
indicator ashes blue.
2. Fit the headset over and behind your ear as described on page 3.
3. Set the Lifter Height Switch to the lowest setting.
Status Indicator
Power/Mute
Button