Filter
Top Products
6
Plantronics Voyager 510S Setup Guide
connect Power and charge headset
3
S T E P
Insert into yellow labeled power
connection on Headset Base as
shown to charge.
Headset Base
(bottom view)
Base
Power
Adapter
1. Plug the Base Power Adapter into a wall outlet, then plug the power cord into the yellow
labeled connector on the bottom of the Headset Base. The red Power light on the left
front of the Headset Base will turn on. (See illustration at bottom of page.)
A. Connect Headset Base to power outlet
1. Gently push the headset into the charging cradle as shown below. The amber Charge Status
light on the base will ash to indicate the headset battery is charging. A solid light indicates
full charge. A full charge will take approximately 3 hours.
B. Charge the Headset for at least 20 Minutes before using
The headset may also be charged directly with the
Headset Travel Charger. Plug the headset travel charger
into a wall outlet, then plug the power cord from the
adapter into the headset. The indicator light will ash
red while the headset battery is charging. The light will
change to solid blue when the battery is fully charged.
Power
(Red)
Charge Status
(AmbeR)