Filter
Top Products
14
Plantronics Voyager 510S Setup Guide
Your Voyager 510S Bluetooth Headset System comes from the factory with the headset and
base already paired. However, if you have purchased a base unit separately, or if you wish to
use a replacement headset with your existing base unit, the units must be paired as follows:
Note: Make sure your headset is not connected to any other Bluetooth device when attempting
to pair.
1. On the back of your base unit, press
and hold both the Speaking Volume
Minor Adjust Control buttons simul-
taneously until the on line indicator
light ashes blue and the power light
(on the front of the unit) ashes red.
2. On your headset, press and hold
both the Listening volume adjust (+)
button and the Call Control Button
simultaneously until the red and blue
indicator lights ash alternately.
3. Pairing is complete when the
indicator light on the base is solid
blue and the Status Indicator light
on your headset ashes blue.
Pairing Headset and Base
Call Control Button & Talk/
On-line Indicator Light
Speaking Volume
Minor Adjust
Buttons
Headset Base
(back view)