Filter
Top Products
12
13
en
Using More Than One Bluetooth Phone
Plantronics Discovery 925 supports multipoint technology, which allows
you to use one earpiece with two different Bluetooth mobile phones.
How to Turn the Multipoint Feature On and Off
To use more than one phone, you must turn the multipoint feature on.
When this feature is off, your earpiece can connect to only one Bluetooth
phone.
1 With your earpiece turned off, press and hold the volume and
call control buttons simultaneously until earpiece turns on and
indicator flashes blue 2 times.
2 To pair earpiece to a second phone, see “Pairing Your
Earpiece” on page 5.
NOTE To turn the multipoint feature off, repeat step 1. The indicator
flashes blue 1 time to indicate multipoint is off.
How to Initiate a Call
The earpiece initiates a call on the phone you most recently used. To
use the second phone, initiate the call using the controls on the second
phone. The second phone forms an active link with the earpiece.
How to Answer a Call While Talking on the Other Phone
To answer the second call, the first call must be terminated. There is no
function for placing one call on hold while answering another call from the
earpiece.
1 Press the call control button once to hang up the existing call.
2 Press the call control button again to answer the new call from
the other phone.
NOTE If you choose not to answer the second call, and you have voice
mail on the second phone, the call will go to voice mail.
Troubleshooting
Audio quality
is poor.
Make sure that earpiece is sitting correctly in ear
with boom pointing towards corner of mouth.
See “Adjusting the Fit” on page 6.
Callers cannot
hear me.
Your earpiece is out of range. Move the earpiece
closer to the Bluetooth phone. See “Range” on
page 9.
The eartips do not
fit my ear.
Try a different size eartip. See “Adjusting the Fit”
on page 6.
My earpiece falls
out of my ear.
Make sure that Earpiece is sitting correctly in ear
with boom pointing towards corner of mouth.
See “Adjusting the Fit” on page 6.
My eartip needs to
be cleaned.
Remove the eartip from the earpiece and wash it
in warm soapy water and dry thoroughly. When
the eartip is completely dry, put it back on your
earpiece.