Filter
Top Products
8
9
en
Range
To maintain a connection, keep your earpiece within 33 feet (10 meters)
of the Bluetooth phone. If there are obstacles between your earpiece and
the phone you may experience interference. For optimal performance,
place your earpiece and phone on the same side of your body.
Audio quality degrades as you move out of range. When you are
far enough away to lose the connection, you hear a high tone in the
earpiece.
The earpiece attempts to reconnect for 60 seconds. If you move back in
range, you can manually reconnect by pressing the call control button.
NOTE Audio quality is also dependent upon the device with which the
Earpiece is paired.
Earpiece Controls
Turning the
multipoint feature on
To prolong battery life, the multipoint feature
is turned off by default. To turn on feature, see
“Turning the Multipoint Feature On and Off” on
page 13.
Turn off the online
indicator
Press and hold the volume button for 4 seconds
while the earpiece is on. Blue light will dim over
2 seconds. Repeat action to activate online
indicators. Blue light will brighten over 2 seconds.
You will hear a single low tone, silence, and then
a double low tone.
Adjust the volume During an active call, tap the volume button.
There are 3 volume settings. Each tap will
increase the volume until maximum is reached
and you hear two low tones. Tapping again will
drop volume to minimum setting and subsequent
taps will increase volume until maximum is again
reached.
Hands-Free Features
If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Redial the last number
you called
Tap the call control button twice. You will
hear two low tones.
Voice activated dialing When the earpiece is on, press and hold
the call control button for 2 seconds until
you hear 1 low tone.
WARNING Do not use headphones/Earpieces at high volumes for an extended
period of time. Doing so can cause hearing loss. Always listen at moderate levels. See
www.plantronics.com/healthandsafety for more information on Earpieces and hearing.
Indicator Lights and Tones
Light Tone
Status check 1 blue flash 1 tone
Charging 1 red flash every 10 seconds None
Fully charged None None
Low battery 2 red flashes for 2/3 full battery None
Very low battery 3 red flashes every 10 seconds 3 high tones every
10 seconds
Pairing Red and blue flashes 1 low tone
Paired Blue flashes 1 low tone
Turning on Solid blue for 2 seconds Ascending tones
Turning off Solid red for 4 seconds Descending tones