Filter
Top Products
46
Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000
Delete TCP mapping rule ---no entry –ip x.x.x.x –lanport xxx –wanport xxx
Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000
Add UDP mapping rule ---udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
Delete UDP mapping rule ---no udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
Show NAT info ---show
¾ Netservice
path: <config-netservice>#
Set DNS address ---dns -ip x.x.x.x _domain xxx
Example:<config-netservice>#dns –ip 202.112.10.36 _domain voip.com
Set alternate DNS address ---alterdns -ip x.x.x.x _domain xxx
Set hostname ---hostname xxx
Set http access port ---http-port xxx
Show http access setting ---http-port
Set telnet access port ---telnet-port xxx
Show telnet access port ---telnet-port
Set RTP initial port and quantity ---media-port –startport xxx –number xxxx
Example:<config-netservice>#media-port –startport 10000 –number 200
Add route rule ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Example:Arcihfone<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask
255.255.255.0
Delete route rule ---no route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Show route info ---route
Show netservice info ---show
¾ Dial-peer settings
path: <config-pbook>#
[disable]enable calling through GK and proxy ---[no]enableGKandProxy
Add number-IP bond entry ---entry –number xxx –ip x.x.x.x –protocol xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip
Add number-IP bond and add prefix to the dial number