Filter
Top Products
09
49
En
HDMI troubleshooting
Disc containing PC files won’t play. • Make sure the disc is compatible with this player (see Disc/content format playback compatibility on
page 7).
• This player is compatible with multi-border discs, but only plays the first border.
• Check that the file complies to one of the supported formats, bit rates or profiles (see File
compatibility on page 7). Also check that the file is not damaged.
• If the message ‘Cannot play this format’ is displayed when you try to play PC files, check the file
formats.
• This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc
Navigator with a lock icon
().
No picture or High Definition video output
when watching a BD.
• For copy-protection purposes, composite, S-Video and component video output may not possible.
See Connecting for HDMI output on page 11 to connect using HDMI.
Image is blurred when you begin playback
of a disc.
• Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.
Colours are not displayed properly on the
TV.
• When you have used the included video cables to connect this unit to a TV that does not support
either NTSC or PAL, some colours may not display correctly. For more information please refer to the
operating instructions of your TV, and confirm the TV system settings of this unit.
Tracks/files are repeated during random
play.
• Because tracks/files are selected entirely at random, same tracks/files may be played in quick
succession. For example, ‘Track 1’ may be followed by ‘Track 5,’ only to have ‘Track 1’ play again next.
This is not a malfunction.
SlideShows do not play. • If you have selected a single file and select Slideshow from the Photo Options menu, then only
that single file is played back. To play a slideshow you must select All Photos from the browse
menu.
Images no longer displayed when you
change the 24p Direct Out setting to On.
• Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 12).
CDs cannot be copied on other external
components.
• The audio signals of a CD output at the jacks of this player are protected from copying and cannot
be copied on other external components.
• To copy the audio signals recorded on a CD, connect your external components to the AUDIO OUT
(2ch) jacks of this player.
Video is distorted during playback of a
movie file
on a DVD-R/-RW disc or media
servers.
• Verify that the TV system frame rate (50 Hz/60 Hz) is set properly. The TV system can be switched
over using the Blue button (see About NTSC/PAL TV systems on page 20).
Problem Remedy
Problem Remedy
No HDMI video output. (A connected
HDMI component doesn’t work with this
player.)
• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).
Depending on the component you have connected, unreliable signal transfers may result.
• If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with
High-bandwidth Digital Content Protection (HDCP).
• If the front panel HDMI indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the settings for the component
you’re using. You may need to refer to the instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable isn’t damaged.
• If the front panel HDMI indicator is lit:
– Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 12).
•
Depending on the HDMI cable being used, 1080p output may not appear correctly (The
supplied HDMI cable is capable of outputting 1080p video).
Colours are too rich or too weak, or black
is too deep or appears to ‘float’.
• Use a different HDMI Color Space setting (page 39).
No HDMI audio output. • If you have connected to an HDCP-compatible DVI component, there won’t be any audio output
from the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).
• Verify that the connected HDMI device is compatible with Dolby TrueHD or Dolby Digital Plus (i.e. if
bitstream output is allowed). If the HDMI device is not compatible, the audio will be converted into
D1olby Digital or Linear PCM.