Filter
Top Products
5
Environment and safety
1 Environment and safety
1.1 Safety information
This telephone is not designed for making
emergency telephone calls when the power fails.
An alternative should be made available for access
to emergency calling.
1.2 Power requirements
The product requires an electrical supply of
120 volts, single phase alternating current,
excluding IT installations defined in standard UL
60950. In case of power failure, the
communication can be lost.
1.3 Battery requirements
The handset requires power source of two
rechargeable NiMH batteries, size AAA 1.2V
750mAh (HR11/45).
CAUTION
The electrical network is classified as dangerous
according to criteria in the standard UL 60950.
The only way to power down this product is by
unplugging the power supply from the electrical
outlet. Ensure the electrical outlet is located
close to the apparatus and is always easily
accessible.
1.4 Telephone connection
The voltage on the network is classified as
TNV-3 (Telecommunication Network Voltages,
as defined in the standard UL 60950). Following a
power cut, the call in progress is lost.
Warning
Users should ensure for their own protection
that the electrical ground connections of the
power utility, telephone lines and internal metallic
water pipe system, if present, are connected
together. This precaution may be particularly
important in rural areas.
1.5 Environmental care
Please remember to observe the local regulations
regarding the disposal of your packaging
materials, exhausted batteries and old phone and
where possible promote their recycling.
1.6 Precautions
• Because the phone works by sending radio
signals between the base unit and the handset,
wearers of hearing aids may experience
interference in the form of a humming noise.
• We advise that this phone should not be used
near intensive care medical equipment, nor by
persons with pacemakers.
• Your phone can interfere with electrical
equipment such as answering machines, TV and
radio sets, clock radios and computers if placed
too close. It is recommended that you position
the base unit at least one meter from such
appliances.
CAUTION
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter:
Input: 120 VAC 60 Hz
Output: 9 VDC 400 mA
Charger adapter:
Input: 120 VAC 60 Hz
Output: 9 VDC 200 mA
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use nonrechargeable batteries; use
recommended type supplied with this telephone.
NiMH batteries must be disposed of in
accordance with the applicable waste disposal
regulations.
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET BOTTOM
The term “IC:” before the certification number
signifies that Industry Canada technical
specifications were met. This certification means
that the equipment meets certain radio
communications and operational requirements.
!
!
!
!