Filter
Top Products
PROGRAMMING OPTIONS (CONT’D)
6
English
How to register the handset with another base station
This option is only used to connect your handset to another base station for increased range (you
should reset the base station before entering the RC code).
Function number Programmable function Select
1/1 Registers the handset Type value 0000 to 9999
Earpiece programming option
Function number Programmable function Select
1/1 Modifies earpiece volume List: 1 to 4
Should you use a KALA 200 base station as your main telephone installation, please visit
www.pcc.philips.com for details concerning the telephone answering machine options and other settings.
For all other equipment, consult your base station user guide.
Philips has designed this product to work on PSTN line and cannot guarantee the complete application on ISDN network.
The KALA TD6830 is compliant with operator’s analogue interface.
TROUBLESHOOTING
Cause or causes
The base station is not properly connected
to electricity or to the telephone sockets.
Batteries are low.
The handset is out of range.
The handset is not placed correctly on the
base station charging unit.
Charging contacts are dirty.
Handset batteries are defective.
Batteries are low.
Base station plugged too near from other
electrical appliance.
Base station installed in a room with thick
walls.
You are using the handset too far from the
base station.
Problem
• No dialling tone when pressing
the talk key.
• Area icon not displayed or blink-
ing.
• When the handset is placed on
the charging unit, no beep is
heard.
• Battery icon remains empty
although the handset has charged
for 24 hours.
• No symbol on the display.
• Bad audio quality (cracks, mute,
echo, vibration, etc.).
Solution
Check the connections.
Charge batteries.
Register the handset to the base station.
Take the handset off the charger and put it back
again.
Clean them with a clean and dry cloth.
Please contact your PHILIPS dealer in order to
purchase new rechargeable batteries (see
Inserting/Replacing batteries Page 2).
Charge batteries.
Try to plug the base station in another place.
Try to plug the base station in another place.
Move closer to the base station.
Error
Beep
Yes
Yes
-
-
-
-
-
-
-
KALA Combine multilingue 23/02/01 18:30 Page 6