Philips SE658 Answering Machine User Manual


 
45
Using the Call log
11 Using the Call log
The call log stores the last 50 external
calls and any new voice mail received. In
idle mode, New Call appears on the
handset or base display for new and
unanswered calls. If you have subscribed
to Caller Line Identification (CLI), and
provided the identity of the caller is not
withheld, the name (or number) of the
caller will be displayed.
During CLI display, you can press * to
toggle area code and long distance code
display on/off.
If the identity of the caller is withheld,
External Call is displayed in the call log
along with the date and time of the call. If
you have not subscribed to Caller Line
Identification service, there will not be
any caller information displayed in the call
log.
11.1 Access the Call log
1 Press u in idle mode, and scroll
n to browse the call log.
The calls (missed and received)
are displayed in chronological
order with the most recent call
at the top of the list. If the call is
unviewed and unanswered, New
appears on the display. After you
view the message, New
disappears.
Press t to dial out the number
of the selected call log entry.
2 To view the call details, press o
Menu and then press o Select.
The display shows the caller
information.
•Press c Back at any time to
return to the previous menu.
11.1.1 To choose the format for call
log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
1 When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-567-
8900”:
•Press * once to display “1-234-
567-8900”
•Press * twice to display “567-
8900”
•Press * 3 times to display “1-
567-8900”
•Press * 4 times to display
“234-567-8900” again.
2 To dial the current displayed
number, press t (or l on the
base station).
The call is initiated.
You need to subscribe to Caller Line
Identification service to be able to see
Note
Note