Filter
Top Products
33
Using your phone
8 Using your phone
8.1 Make a call
8.1.1 Predialling
1 Enter the number. (A maximum of
24 digits including * and # are
allowed. Press c Clear to delete
the last digit.) Or long press to
delete all.
2 From the handset: Press t. (Or
press l on the handset to start a
call in speaker mode.)
From the base: Press
l
.
• The call is initiated.
8.1.2 Direct dialling
1 From the handset: Pick up the
handset and press t. (Or press
l on the handset to start a call in
speaker mode.)
From the base: Press
l
.
2 Dial the number.
• The call is initiated.
8.1.3 Call from redial list
1 Press r in idle mode.
2 Scroll n to an entry in the redial
list.
3 Press t or l (or l on the
base station).
• The call is initiated (with
loudspeaker on if from the base
station).
• The handset(s) and base station each
have their own redial list.
• You can also press t or l (or
l on the base station) first and
then press c Redial to enter the
redial list. Then scroll n to select a
number in the list and press o
Select. The number is dialed
automatically.
8.1.4 Call from the call log
• The call log is shared between
handset(s) and the base station.
• You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log. See section 11.1 - “Access the
Call log”.
1 Press u in idle mode, then scroll
n to an entry in the call list.
If the list is empty, then “List Empty” is
displayed.
2 Press t or l (or l on the
base station).
• The call is initiated (with
loudspeaker on if from the base
station).
8.1.5 Call from the phonebook
1 Press d in idle mode.
2 Scroll n to a phonebook entry.
3 Press t or l (or l on the
base station).
• The call is initiated.
Note
Note
Note