Filter
Top Products
14 Getting started
Turn the bracket around.
Re-insert the bracket to the back of
the base station.
Align the mounting holes on the
back of the base with a standard wall
phone mounting jack.
Slide the base down into place.
4.2.2 Wall mounting the base
(SE450)
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
Warning
Other wall mounting methods are not
recommended and may damage the
product.
Remove the bracket from the back
of the base station by pressing down
the two latches on the top of the
bracket.
2
3
4
5
!
1
CD450_IFU_EN_US.book Page 14 Wednesday, February 20, 2008 12:07 PM