Filter
Top Products
Getting started 13
4 Getting started
4.1 Connect the base station
Connect the output plug of the main
adapter to the bottom of the base
station.
Connect the main adapter to a
standard wall outlet.
Connect the telephone line cord to
the phone socket at the bottom of
the base station and the wall phone
socket.
Note
The power adapter (for the phone and
charger) are intended to be correctly
orientated in a vertical or floor mount
position.
4.2 Connect your charger
(For multi-pack models only)
Connect the output plug of the main
adapter to the bottom of the charger.
Connect the main adapter to a
standard wall outlet.
4.2.1 Wall mounting the base
(CD450)
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
Warning
Other wall mounting methods are not
recommended and may damage the product.
Remove the bracket from the back of
the base station by pressing down the
two latches on the top of the bracket.
1
2
3
1
2
!
1
CD450_IFU_EN_US.book Page 13 Wednesday, February 20, 2008 12:07 PM