Filter
Top Products
48 EN
23 Baby monitor
Your phone can act as a baby monitor and send
an alert if the sound level exceeds a pre-set
limit. For this, it needs to be placed as a "baby
unit" within the baby's room.
Caution
• Make sure the baby unit and the cord are always out of
reach of the baby.
• Place the baby unit at least 1 meter/3 feet but not
more than 2 meters/6 feet away from the baby.
Activate/Deactivate the baby
unit
1 Tap from the main menu screen.
2 Select [Activate] to activate the baby unit.
Tap [Stop] to deactivate it.
Tip
• If you try to activate the baby monitor function, without
having specied where an alert should be sent to, then
you will be asked to select to where you send the alert:
external lines or other handset number. For information,
see the next section.
Note
• When the baby monitor mode is activated, the baby
handset does not ring on incoming calls.
1-2m
Send an alert
You can send an alert to other handsets within
the home or an external line. External line can
be a mobile phone or another xed line outside
the house.
Note
• Make sure that any prex digits and/or country code
are included when you send an alert.
Send alert to other handsets
1 Tap from the main menu screen.
2 Select [Send alert] > [Intercom].
3 Select the handset number.
Note
• Make sure that the distance between the baby unit and
the parent unit is at least 1.5 meter away from each
other to prevent the howling effect.
Send alert to an external line
1 Tap from the main menu screen.
2 Select [Send alert] > [External line].
3 Enter a telephone number, then tap [Set].
Note
• You can still send an alert to the external line even
though it is in the barred list.
1.5m