Philips S10A Cordless Telephone User Manual


  Open as PDF
of 62
 
35EN
4 Select an outgoing line, then press [OK] to
conrm.
» The setting is saved.
» When you make an outgoing call
starting with the prex number, the
pre-selected outgoing line is used.
Set the time
1 Tap from the main menu screen.
2 Select [Call settings] > [Call rules] >
[Time based], then press [OK] to conrm.
3 Select a time segment.
• from [Recurrence], select an option,
then press [OK] to conrm;
• from [Start & end], enter the time
duration, press [OK] to conrm.
• from [Select line], select an outgoing
line, press [OK] to conrm.
» The setting is saved.
» When you make an outgoing call
during the time segment dened, the
pre-selected line will be used.
Note
• If you have set both the prex number and time, the
prex number setting will override the time setting.
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
• The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Set auto prex
1 Tap from the main menu screen.
2 Select [Call settings] > [Auto prex].
3 Enter the detect number, then tap [OK] to
conrm.
4 Enter the prex number, then tap [OK] to
conrm.
» The setting is saved.
Note
• This is a country dependent feature.
• To enter a pause, press and hold #.
• If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
• The feature is unavailable if the dialed number starts
with * and #.
Set the carrier code, area code,
country code and domestic code
You can enter these values for your phone's
current location if you have used them in
entering numbers on your computer. In case
you transfer a number to your phone, your
phone will use this information to remove these
codes from local numbers, as they can lead to
unsuccessful calls when dialed on a landline.
For example if on your computer you have
stored the number +49 40 1234567, with +49
being the local country code and 40 being the
area code, the phone will save that number in
your phone as 040 1234567 (that is, removing
the country code and add a '0' for local
numbers).
1 Tap from the main menu screen.
2 Select [Call settings] > [Carrier
code]/[Area code]/[Country
code]/[Domestic code].
3 Enter a code of 4 digits at maximum, then
tap [OK] to conrm.
» The setting is saved.
 previous next