Filter
Top Products
42
EN
Advanced Settings
Unregistration
To unregister a handset
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and
press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Select in the list of handsets displayed, the handset that you wish to unregister.
A validation tone is emitted to indicate successful unregistration and the screen shows Unregistered.
Change Master PIN
The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for
accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4
digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever
the PIN is required.
To change Master PIN
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Change PIN and press
mSELECT.
2. Enter the current Master PIN when prompted and press
mOK to confirm. The PIN entered will be
shown as asterisks (*) on the screen.
3. Enter new PIN and press
mOK.
4. Enter new PIN again and press
mOK to confirm PIN change.
A validation tone is emitted, the message New PIN Stored appears and the screen returns to previous menu.
Reset
Reset to default settings
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press
mSELECT.
2. Scroll
: to Yes and press mSELECT.
A validation tone is emitted and the unit is reset to its default settings (Please see "Default settings" on
page 19).
If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted
and the handset returns to stand-by mode.
If an incorrect PIN is entered, the screen returns to previous menu.
The WELCOME mode will appear again after master reset.
ID937_IFU_EN_US.book Page 42 Thursday, February 8, 2007 4:16 PM