Filter
Top Products
41
EN
Advanced Settings
3. Scroll : to Number and press mSELECT.
4. The last stored Baby Call number is displayed (if any).
5. Enter the new Baby Call number and press
mOK to confirm.
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID937 handset. The procedures
may vary according to the handset you want to register. In this case, please refer to the manufacturer of the
additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be
registered to one base station.
To register an additional handset
1. On the base station, press and hold p for 3 seconds. After that, the registration procedure has to be
done within 1 minute.
2. At the same time, on the handset, press
mMENU, scroll : to Advanced Set and press mSELECT,
scroll
: to Registration and press mSELECT.
3. Press
: to select the Base to be registered to and press mOK to confirm.
4. Enter the Master PIN when prompted and press
mOK to start registration.
A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode.
Select Base
One ID937 handset can be registered to up to 4 different ID937 Base stations. By default, the handset will reg-
ister to BASE 1. If you select Best Base, the handset will register to the nearest base station.
To manually select best base station
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Select Base and press
mSELECT.
2. Scroll
: to the desired base station and press mOK to confirm.
3. The handset will start searching for the base station. If the selected base is found, a validation tone is emit-
ted.
The Master PIN is required before you can register or unregister handsets. The default PIN is 0000.
Within 1 minute, the base station is able to accept registration from a handset. If there is no action
taken on the handset within 10 seconds, the registration procedure will be aborted.
If the PIN is incorrect, Incorrect PIN will be displayed and the handset returns to stand-by mode.
ID937_IFU_EN_US.book Page 41 Thursday, February 8, 2007 4:16 PM