Filter
Top Products
22
EN
Call
Initiate a second call (subscription dependent)
1. Press >OPTION and select Init. 2ND Call to put the current call on hold and initiate a second external call.
Consult phonebook
1. Press >OPTION and select Phonebook to access and review phonebook entries.
2. Press
r on the selected phonebook entry, the corresponding number will be dialled.
Activate/deactivate HD Sound mode (see page 43)
1. Press >OPTION and select HD Sound On to activate.
2. To deactivate, press
>OPTION and select HD Sound Off.
Transfer call (subscription dependent)
1. Press >OPTION and select Call Transfer.
The screen shows R4.
2. Enter the phone number that you want to transfer your incoming calls to.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make free internal
calls, transfer external calls from one handset to another and use the conference option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to your base
station (see page 41 "To register an additional handset").
1. Press c key in stand-by mode.
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed. Scroll
: to All
Handsets and press
mSELECT to call all the handsets or scroll to the specific handset you want to call
and press
mSELECT.
Transfer an external call to another handset
1. During the call, make a long press on c key to put the external call on hold (the caller can no longer
hear you).
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for intercom will be displayed. Scroll
: to All
Handsets and press
mSELECT to call all the handsets or scroll to the specific handset you want to call
and press
mSELECT. The called handset rings.
3. Press
r key on the called handset to answer the internal call, where both internal callers can talk.
4. Press
e key on the first handset to transfer the external call to the called handset.
If the handset does not belong to ID937 range, this function may not be available.
If there is no answer from the called handset, press c key to resume the external call.
ID937_IFU_EN_US.book Page 22 Thursday, February 8, 2007 4:16 PM