Filter
Top Products
Frequentl
y ask
ed questions
43
Caller does not hear me!
• Microphone may be muted: During a call,
press to unmuted the microphone.
Noise interference on your radio or
television.
• Move the power adapter or base station as
far away as possible
Product behaviour
Caller Line Identification (CLI) service
does not work.
• Check your subscription with your network
operator
A phonebook entry cannot be stored.
• Check if the phonebook memory is full,
delete an entry to free memory.
The handset is unable to register.
• Make sure that has been pressed for 3
seconds
• Each base can only register up to four
handsets
Answering Machine
The answering machine does not record
calls.
• Make sure the answering machine is
connected to the power adaptor,and the
power adaptor is plugged into mains supply
which is switched on.
• Check if the answer machine is off, or
Answer only mode is selected.
• Check to see if the answering machine is
memory full. If so, delete some or all
messages.
•
T
ry switching off the power at the main
socket, and then turn it on again after
1 minute.
Unab
le to perform remote operation.
• Make sure the remote access is on (see
Section 6.6.4.2)
• Make sure you entered the correct remote
access code
• Use a touch-tone phone
Note
If the above solutions do not help, remove the
power from both the handset and the base.
Wait for 1 minute and try again.
Note
If the above solutions do not help, remove the
power from both the handset and the base.
Wait for 1 minute and try again.
CD645.QXD 2/1/07 10:18 AM Page 43