Filter
Top Products
Use more of y
our phone
26
pr
ompt you whenever the PIN is required.
Press to access the main menu
Press / to select
Advanced Set
Press and / to select Change
PIN
Press to enter the 4-digit master PIN
when prompted
Press to enter the new 4-digit PIN
Press to enter the new 4-digit PIN again
for reconfirmation
Press to save the settings
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN code.
5.8.9 How to reset to default settings
You can reset your phone to the default settings
(see Section 5.7).After a reset, all your personal
settings and call log entries will be deleted, but
your phonebook remains unchanged.
Press to access the main menu
Press / to select
Advanced Set
Press and / to select Reset
Press to enter the 4-digit master PIN
when prompted (default master PIN is 0000)
Press confirm
Press to reconfirm
• A beep tone is emitted and the screen returns
to welcome screen. Your phone is reset to its
default settings.
• Some of the countries may not have welcome
screen and your phone will return to idle screen
after reset.
5.8.10 How to set the prefix number
This feature allows you to set the phone to use
the cheapest operator prefix. Once the prefix
number is set, it is automatically inserted at the
beginning of each number dialled out.
Press to access the main menu
Pr
ess
/ to select
Advanced Set
Press and / to select Auto
Prefix
3
2
1
6
5
4
3
2
1
7
6
5
4
3
2
1
Press and enter the 4-digit master PIN
when prompted (default master PIN is 0000)
Press and press on the base station
for more than three seconds at the same
time.
• A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect,
Wrong PIN! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period,
No
Base found!
would be displayed with an error
tone, and the handset returns to idle mode.
5.8.7 How to unregister a handset
Press to access the main menu
Press / to select
Advanced Set
Press and / to select
Unregister
Press to enter the 4-digit master PIN
when prompted (default master PIN is
0000)
Press and / to select your
desired handset
Press to confirm
• A beep tone is emitted from the handset to
indicate the handset unregistration is successful
and the screen shows
Unregistered and back
to idle screen.
Note
If there ar
e no key presses within 15 seconds,
the unregistration procedure will be aborted
and the handset will return to idle mode.
5.8.8
How to change the master PIN
The Master PIN is used for setting call barring,
resetting your handset and for
registration/deregistration of handsets.The
default PIN is 0000.
The length of the PIN is
four digits.This PIN is also used to protect the
settings of your handset.Your handset will
6
5
4
3
2
1
6
5
CD645.QXD 2/1/07 10:18 AM Page 26