Filter
Top Products
Extra
48
http://www.philips.com/faqs/dect
To set the alarm ring tone type and ring tone volume
To set the Do Not Disturb mode
Press to enter the carousel menu
Scroll to Extra and press to select
Scroll to Alarm clock and press to select
Scroll to Settings and press to select
Press to select Ring tones
Press to enter the carousel menu
Scroll to Extra and press to select
Scroll to Do Not Disturb mode and press to select
Scroll to Set day, press to select the day and press
Choose among the available ring tones and press to select
Scroll to Ring tone volume and press to select
Choose among the available volume levels and press to select
A long press on activates/deactivates this mode with your own settings.
Warning! only allowed callers will be able to reach you during the selected day & time
This feature allows you to screen calls after a certain time in the evening or when you do not want
to be disturbed. Enter the time and select the group(s) allowed to call you. If none of the 4 groups
is selected but the feature is activated, then nobody will be able to reach you.If the caller does not
belong to an allowed group, the handset and base station will remain silent, while the caller will hear
ringing.The answer machine (if activated) or the operator voice mail (network dependent) will answer
the call.The feature is deactivated by default. You need to subscribe to the Caller Line Identification
service (CLI).
Do Not Disturb mode
Scroll to Start time, enter the time and press
Scroll to Stop time, enter the time and press
Scroll to Allowed caller choice, activate the callers group(s) allowed to call you
and press to select
DECT521_GBIE_part2.qxd 27.01.2005 15:36 Seite 48