Filter
Top Products
Handset
28
http://www.philips.com/faqs/dect
Handset
Babysit mode Display contrast
Registration Backlight
Rename handset Screen saver
Date & time
This feature allows you to monitor the baby’s room. Place the handset in the room to be monitored
and you will hear the noise coming from the room on the additional handset.
Babysit mode
Registration
Press to enter the carousel menu
Scroll to Handset and press to select
Press to select Babysit mode
Select On or scroll to Off and press to confirm
Up to 6 handsets can be registered to the base station. One handset can be registered to 4 base stations.
Warning: If you wish to associate non Philips handsets to the DECT 521 or DECT 525 base
station, make sure that this handset is GAP compliant otherwise it will not operate properly (see p 13).
To activate/deactivate the babysit mode
An intercom is necessary to monitor the room (see page 38).
Note: during an intercom, you can still answer a call or make a call with the handset
Unplug and plug back in the mains lead to put the base in registration mode and start the following
procedure immediately after that.
Enter the 4-digit RC code written on the sticker placed under the base station and
press
To register a handset
if there are at least 2 handsets
To unregister a handset
Press to enter the carousel menu
Scroll to Handset and press to select
Note: should you have your handset serviced alone, please make sure it is un-registered from the base
station before taking it back to the repair centre.
Enter the 4-digit RC code and press
Scroll to Un-register handset and press to select
Scroll to Registration and press to select
Choose the handset to un-register from the list and press
Press to enter the carousel menu
Scroll to Handset and press to select
Press to select Register handset
Scroll to Registration and press to select
DECT521_GBIE_part1.qxd 27.01.2005 17:50 Seite 28