Filter
Top Products
Answer machine
36
http://www.philips.com/faqs/dect
The default code is the registration code (written under your base station).We advise you to
personalize it.
To change the remote control code
Press to enter the carousel menu
Scroll to Answer machine and press to select
Scroll to Answphone settings and press to select
Scroll to Remote control and press to select
Scroll to Change code and press to select
Delete the default code, enter your new remote control code and press
To remotely access your answer machine :
- from another phone dial home
- if your answer machine is on, during or after the message press the star key on the handset ;
if your answer machine is off, you will hear a beep after 39 seconds, then press the star key
- dial your remote control code (the default code is the registration code RC)
- if you have new messages they will be automatically played.
To remotely control your answer machine
The following table indicates the features available when remotely accessing the answer machine.
Delete dial
Activate answer machine dial
Stop dial
Deactivate dial
9
8
7
6
Record memo dial
Play previous message dial
Play message dial
Play next message dial
Listen again dial
5
3
2
1
0
DECT521_GBIE_part2.qxd 27.01.2005 15:36 Seite 36