Filter
Top Products
Declaration of conformity
13
http://www.philips.com/faqs/dect
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate
disposal of your eventual waste.
A financial contribution has been paid to the associated national recovery & recycling system.
The labelled packaging material is recyclable.
DECT
TM
is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.
We,
PHILIPS Consumer Electronics
Route d'Angers
72081 Le Mans Cedex 9
France
Declare that the products DECT521xx and DECT525xx are in compliance with ANNEX III of
the R&TTE-Directive 1999/5/EC and then with the following essential requirements:
Article 3.1 a : (protection of the health & the safety of the user)
Safety : EN 60950-1 (10/2001)
SAR : EN 50371 (2002)
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility)
EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)
Article 3.2 : (effective use of the radio spectrum)
Radio : EN 301 406 V1.5.1 (2003)
The presumption of conformity with the essential requirements regarding Council Directive
1999/5/EC is ensured.
Date : 04/03/2005 Le Mans
Product Quality Manager
Home Communication
Using GAP standard compliance
The GAP standard guarantees that all DECT
TM
GAP handsets and base stations comply with a
minimum operating standard irrespective of their make.Your DECT 521/525 handset and base
station are GAP compliant, which means the minimum guaranteed functions are : register a
handset, take the line, receive a call and dial.The advanced features may not be available if you
use another handset than a DECT 521/525 with your base station.
To register and use your DECT 521/525 handset with a GAP standard base station of a
different make, first follow the procedure described in the manufacturer’s instructions, then
follow the procedure page 28.
To register a handset from another make to the DECT 521/525 base station, place the base
station into registration mode (page 28), then follow the procedure in the manufacturer’s
instructions.
Declaration of conformity
DECT521_GBIE_part1.qxd 27.01.2005 17:50 Seite 13