Philips CD190 Cordless Telephone User Manual


 
8 EN
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
Use only the supplied batteries.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
Charge the batteries for 8 hours before rst use.
If the handset becomes warm when the batteries are
being charged, it is normal.
Warning
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Congure your phone
(country dependent)
1 When using your phone for the rst time,
you see a welcome message.
2 Press MENU/OK.
Set the country/language
Select your country/language, then press
MENU/OK to conrm.
» The country/language setting is saved.
Note
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1 Select [MENU] > [PHONE SETUP] >
[LANGUAGE], then press MENU/OK to
conrm.
2 Select a language, then press MENU/OK
to conrm.
» The setting is saved.
Set the date and time
Tip
To set the date and time later, press REDIAL/C to skip
this setting.
1 Press MENU/OK.
2 Select [PHONE SETUP] > [DATE/TIME],
then press MENU/OK to conrm.
3 Press the numeric buttons to enter the
date, then press MENU/OK to conrm.
» The time setting menu is displayed on
the handset.
4 Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press
/ to select [AM] or [PM].
5 Press MENU/OK to conrm.
Change the remote access
PIN code
Note
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.