Filter
Top Products
3. Configuration Using the Web Interface
8900-A2-GB20-30 June 2004
3-13
3. Click on Apply.
End VCI Enter the last VCI for this side of the cross-connection.
Segment End Point Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This field
determines if the port card will function as an endpoint for
ATM OAM loopbacks. If False, the port card will loop back a
cell only if its location ID matches the preconfigured
location ID. (See Configuring ATM Ports on page 3-16.) All
other loopback cells are passed to the next segment.
Port B
Slot Select from the drop-down list the slot where the card
associated with this port resides.
Port Select the user port for the cross-connection.
VPI Enter the VPI for the user side of the cross-connection.
Start VCI Enter the first VCI for the user side of the cross-connection.
End VCI Enter the last VCI for the user side of the cross-connection.
Segment End Point Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This field
determines if the port card will function as an endpoint for
ATM OAM loopbacks. If False, the port card will loop back a
cell only if its location ID matches the preconfigured
location ID. (See Configuring ATM Ports on page 3-16.) All
other loopback cells are passed to the next segment.
Profiles
Port B to Port A Profile Select a profile for upstream traffic.
Port A to Port B Profile Select a profile for downstream traffic.
Field Description