Filter
Top Products
Help
51
Error messages
N Main monitor station/Sub monitor station
Problem Cause & Solution Page
IN USE
L The main monitor station or the sub monitor station is in use.
Try again later.
―
PROTECTED PIC
REMOVE PROTECT
L The image you tried to erase is protected. Release the
protection, then erase it.
30
31
(Main monitor station)
PROTECT PIC FULL
CAN NOT PROTECT
(Sub monitor station)
PROTECT FULL
CANT PROTECT
LThe number of images you can protect has been exceeded.
You can protect up to 20 images. Release the protection from
other images, then try again.
– Unprotected images will be overwritten by new images.
30
N Sub monitor station only
Problem Cause & Solution Page
CAN NOT CONNECT
L The sub monitor station is too far from the main monitor
station. Move closer to the main monitor station. If you install a
repeater (optional), the problem may be solved.
L There is an object such as a concrete wall obstructing the
signal. Move to a place without an obstacle. If you install a
repeater (optional), the problem may be solved.
L A microwave or wireless LAN appliance is in use. Move closer
to the main monitor station or use a sub monitor station located
away from those appliances. Try again.
7, 45
7, 45
7
REGISTRATION ERROR
L The registration to the main monitor station is not completed.
Move closer to the main monitor station and register it again.
44