Filter
Top Products
Help
27
N Conversation
Problem Cause & Solution Page
Sound cuts in/out or fades.
LThe surroundings of the main monitor station or the door
station are noisy. Try “Press-to-talk” mode.
11
Your voice cannot be heard by
the outside visitor. (Visitor’s voice
can be heard.)
LWhen
is displayed, the “Press-to-talk” mode is activated.
Only while pressing {TALK/OFF}, the outside visitor can hear
your voice.
11
Voice answer mode does not
operate properly.
LYour voice is not loud enough or your initial reply is too long
(must be less than 1 second). Try a different voice volume or
change the length of your answer until the main monitor station
beeps.
10
N Ringer tone
Problem Cause & Solution Page
The ringer tone for the door
station does not sound.
LThe ringer volume is turned off. Turn it on.
18
N Others
Problem Cause & Solution Page
The main monitor station and the
door station do not work during a
power failure.
L The unit does not work during a power failure. The date and
time may be reset to the default setting after a power failure. In
this case, set the date and time using the main monitor station
again.
9
L “DEMO MODE” is displayed.
L You cannot answer the call.
L Demo mode is activated. Change the setting to “OFF”.
23
L The unit does not work with
correct operations.
L The unit does not work properly.
LPerform the following operation (Reset).
– Press and hold {MENU} and {PLAY} together for about 3
seconds. (Recorded images and the program settings are
not affected.)
―
The main monitor station does
not work.
LThe display monitor does not
display anything.
LThe ringer tone does not sound.
LNo voices can be heard.
LThe plug is disconnected from the power outlet, or it is about to
be disconnected. Disconnect the plug, and connect it securely
again. If this does not solve the problem, contact our service
personnel.
―