Filter
Top Products
Programming
21
Changing the function settings (Function list)
How to change the function settings
{MENU}
{TALK/OFF}
{MONITOR}
1 Press {MENU}, then select the desired item by
pressing {MENU} (
▲
SELECT).
2 Press {MONITOR} (OK), then select the desired
item by pressing {MENU} (
▲
SELECT).
3 Press {MONITOR} (OK), then select the desired
setting by pressing {MENU} (
▲
SELECT).
LIn some functions, repeat this operation
according to the display instructions.
4 Press {MONITOR} (OK).
5 To end the setting, press {TALK/OFF}.
Note:
LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen
automatically quits.
Function list
The default setting is indicated in bold.
Item (function) Setting
TIME AND DATE
SETTINGS
LYou can set the current date and time (page 9).
RING/ANSWERING SETTINGS
RING VOLUME HIGH, MEDIUM, LOW, OFF
LYou can select the ringer volume of the main monitor station (page 18).
RING TONE DOOR STATION 1: SOUND 1, SOUND 1 (REPEAT),
SOUND 2, SOUND 2 (REPEAT),
SOUND 3, SOUND 3 (REPEAT)
DOOR STATION 2: SOUND 1, SOUND 1 (REPEAT),
SOUND 2, SOUND 2 (REPEAT),
SOUND 3, SOUND 3 (REPEAT)
LYou can select the ringer tone of the main monitor station for calls from the
door station (page 19).
VOICE ANSWER ON, OFF
LYou can answer a call from the door station by answering with a clear voice
such as “Yes?” or “Hello?” unless you press {TALK/OFF} (page 10).
–
Even if “ON” is selected, you can answer a call by pressing {TALK/OFF}.