Filter
Top Products
Programming
20
Setting {DOOR KEY} button
When a separate door opener is connected to the main monitor station, you can open the door using the main
monitor station. You can also select how long the door remains open. If you do not use the door opener, select
“NOT CONNECTED”.
LThe default setting is “5 SEC OPEN”.
{MENU}
{TALK/OFF}
{MONITOR}
1 Press {MENU}, then select “CONNECTED DEVICE SETTINGS”
by pressing {MENU} (
▲
SELECT).
FUNCTION SETTINGS
TIME AND DATE SETTINGS
RING/ANSWERING SETTINGS
RECORDING/PLAY SETTINGS
CONNECTED DEVICE SETTINGS
2 Press {MONITOR} (OK), then select “DOOR KEY” by pressing
{MENU} (
▲
SELECT).
CONNECTED DEVICE SETTINGS
DOOR STATION CONNECTION
LOBBY CONNECTION
DOOR KEY
3 Press {MONITOR} (OK), then select the door opener to be set
by pressing {MENU} (
▲
SELECT).
DOOR KEY
DOOR KEY 1
DOOR KEY 2
4 Press {MONITOR} (OK), then select the desired item by
pressing {MENU} (
▲
SELECT).
DOOR KEY 1
2 SEC OPEN
3 SEC OPEN
4 SEC OPEN
●
5 SEC OPEN
6 SEC OPEN
7 SEC OPEN
NOT CONNECTED
Current
setting
5 Press {MONITOR} (OK).
L“r” moves to the selected item.
6 To end the operation, press {TALK/OFF}.
Note:
LAfter setting the {DOOR KEY} button, confi rm that the door can be properly locked/unlocked depending on the
status of the door opener. If needed, change the time how long the door remains open by performing the steps
above again.