Panasonic VL-SV30BX Intercom System User Manual


 
Programming
22
How to change the function settings
{MENU}
{TALK/OFF}
{MONITOR}
1 Press {MENU}, then select the desired item by
pressing {MENU} (
SELECT).
2 Press {MONITOR} (OK), then select the desired
item by pressing {MENU} (
SELECT).
3 Press {MONITOR} (OK), then select the desired
setting by pressing {MENU} (
SELECT).
LIn some functions, repeat this operation
according to the display instructions.
4 Press {MONITOR} (OK).
LIf “DELETE ALL PICTURES” or “INITIALIZE
SETTINGS” is selected (page 23), the
con rmation message is displayed. After the
message is displayed, press {MONITOR}
(YES).
5 To end the setting, press {TALK/OFF}.
Note:
LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen
automatically quits.
Function list
The default setting is indicated in bold.
Item (function) Setting
RECORDING/PLAY SETTINGS
PLAY LAMP
FLASHING
YES, NO
LIf you select “YES”, the PLAY indicator ashes when unviewed images taken
by the door station remain (page 14).
PICTURE RECORD
TIMING
NORMAL (about 2 seconds), DELAYED (about 3 seconds)
LSelect “DELAYED” at night when the recorded images are dif cult to see if the
door station auto recording feature is turned on.
(You cannot select the setting for door station 1 or 2 separately.)
DISPLAY
RECORDING DATE
ALWAYS, 3 SEC
LYou can set the recording time and date and the guidance to be displayed
while viewing the recorded image.
LWhen “3 SEC” is selected:
(Directly after being displayed) (About 3 seconds later)
BACKSKIPMENU
5 16 JAN 20:00
UNPLAYED