Panasonic VA-309 Telephone User Manual


 
With system speed dial you use a two digit address number instead of dialing the whole
telephone number.
You can use the address number for system speed dial on all system telephones.
Up to 90 address numbers for system speed dial from 00 to 89 can be stored, and a
telephone number can be stored even while the other telephones are being used.
Telephone numbers of up to 16 digits including
*,
#, FLASH and PAUSE can be stored.
If a new telephone number is stored, the old telephone number is erased and new
contents are set.
To store a number (from extension 10 only)
1. Press ON/OFF key
*
Listen for the intercom dial tone from speaker.
The
ON/OFF
indicator will light up.
2. Press AUTO key
3. Press any address number from 00 to 89
4. Press the telephone number for speed dial storing
+
HOLD
KJ
5. Press HOLD key
(If you wish to store another system speed dial, repeat steps
2 to 5 for each case)
6. Press ON/OFF key
* The
ON/OFF
indicator goes off.
.
.
.
.
;:
10