Answering System Features
26
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Erasing all messages
Using the base unit
Press {4} 2 times.
Using the handset
1 {j/OK}
2 {^}/{V}: “Answer System” i
{>}
3 {^}/{V}: “Erase Message” i
{>}
4 {^}/{V}: “Erase All” i {>}
5 {^}/{V}: “Yes” i {>} i {ih }
Calling back (Caller ID
subscribers only)
If caller information was received for the
call, you can call the caller back while
listening to a message.
1 Press {j /OK} during playback.
2 {^}/{V}: “Call Back” i {>}
Editing the number before calling
back
1 Press {j/OK} during playback.
2 {^}/{V}: “Edit and Call” i
{>}
3 Edit the number. i {C }
Direct command
operation using the
handset
You can operate the answering system
by pressing dial keys, rather than
navigating through the menus.
To use the following commands:
{j/OK} i {^}/{V}: “Answer
System” i {>}
Remote operation
Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance will prompt you to
press certain dial keys to perform
different operations.
Key Operation
{1} Repeat message (during
playback)
*1
{2} Skip message (during
playback)
{3} Enter the “Settings”
menu
{4} Play new messages
{5} Play all messages
{6} Play greeting message
{7}{6} Record greeting
message
{8} Turn answering system
on
{9} Stop (recording,
playback)
{0} Turn answering system
off
{*}{4} Erase currently playing
message
{*}{5} Erase all messages
{*}{6} Erase greeting message
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.
TG7200-7220E(e).book Page 26 Tuesday, May 22, 2007 9:34 AM