Filter
Top Products
34
Battery Replacement
If “ ” flashes, the battery power is low. Install new batteries as soon as
possible. If batteries are not replaced even after the “ ” is displayed, the
unit may not work properly.
1
Disconnect the telephone line
cord from the unit.
2
Press down in the direction of the
arrow and remove the battery
cover ( ).
3
Replace the batteries with new
ones using correct polarity (+, –)
( ), and close the battery cover.
4
Connect the telephone line cord
to the unit.
• After the battery replacement, the information stored in the Redial List will be
cleared. Store the desired item in the Phone Book List and Caller List.
• The time will be shown as “
12:00
AM
12/31
” or “
0:00 12/31
” after replacing
the batteries, readjust the time and date.
Battery Precautions:
The batteries should be used correctly, otherwise the unit may be damaged by
battery leakage.
—Do not mix different types of batteries.
—Do not charge, short-circuit, disassemble, heat or dispose of in fire.
—Remove all the batteries when replacing.
Note:
— If you do not install the batteries or if the battery power is low, the time will be
shown as “
12:00
AM
12/31
” or “
0:00 12/31
”. Readjust the time and
date after the battery replacement.
— Replace all the batteries every six months if using Alkaline batteries, or
misoperation may occur. (When you use Manganese batteries, replace all of
them every three months.)
— Do not use nickel-cadmium batteries.
1
+
-
-
+
+
-
2
1
2