Filter
Top Products
Special Features
30
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature allows your
unit to display the second caller’s information.
After you hear a call-waiting tone while
talking, the unit will display the caller’s phone
number and “ ”.
• Please contact your telephone company for
details and availability in your area.
Mute
Press
[MUTE]
while talking. “ ” will be displayed.
• The other party cannot hear you but you can hear them.
• To resume the conversation, press
[MUTE]
again.
FLASH Button
Pressing
[FLASH]
allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400, 600,
700 ms (milliseconds)”. Your phone comes from the factory set to “600 ms”.
Make sure that the handset is on the cradle.
1
Press
[FUNCTION/EXIT]
.
2
Scroll to “
SET FLASH TIME ?
” by
pressing
[]
or
[]
.
3
Press
[ENTER]
.
4
Select the desired time by pressing
[]
or
[]
.
5
Press
[ENTER]
.
• The display will return to step 2. To exit
the programming mode, press
[FUNCTION/EXIT]
or wait for
60 seconds.
• You can exit the programming mode any time by pressing
[FUNCTION/EXIT]
.
• If the unit is connected via a PBX, PBX functions (transferring a call, etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
• If there is no battery, Flash function may not operate appropriately.
SMITH,JOHN
12:34
PM
11/24
1-123-456-7890
12:34
PM
11/24
SET FLASH TIME ?
▼
▼
:600MS
▼
▼
SAVED