Filter
Top Products
Remote Operation from a Touch Tone Phone
60
Remote Code (use either or )
The remote code prevents unauthorized people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99) for your remote
code.
The factory preset remote code is “11”. If you do not program your own remote
code, you can use “11”.
To check the remote code, repeat steps 1 to 4.
• The remote code is displayed. When finished, press [STOP].
Press [CONF/FUNCTION], and follow steps 2 to 5 above, using the
cordless handset. Press the soft key ( ), then press [OFF].
1 Press [FUNCTION/EDIT].
2 Scroll to “Initial setting” by pressing
[] or [], then press
[]
.
3 Scroll to “Set answering” by pressing []
or [], then press
[]
.
4 Scroll to “Remote code” by pressing [] or
[], then press
[]
.
5 Enter a 2-digit remote code (00–99).
6 Press
[]
(Save).
• If 3 beeps sound, the entered remote code is the
same as the password (p. 52) and cannot be
used. Start again from step 5 and select another
code.
7 Press [STOP].