Filter
Top Products
Programmable Settings
16
Date and Time (use either or )
Set the clock with either the base unit or the cordless handset. You do not need to
program both on the base unit and the cordless handset.
• When entering the time, you cannot enter numbers greater than 12. Do not use
military time. (To set 13:00 hours, enter “0100”, and select “PM”
.)
: Press [CONF/FUNCTION], and follow steps 2 to 4 above, using
the cordless handset. Press the soft key ( ), then press [OFF].
1 Press [FUNCTION/EDIT].
2 Scroll to “Date and time” by pressing []
or [], then press [].
3 (1) Enter the year, and month and day using
4-digit numbers. (Ex. To set Apr. 7, 2003,
enter “2003” and “0407”.)
(2) Enter the time (hour and minute) using a
4-digit number. (Ex. To set 9:30, enter
“0930”.)
• If you enter a wrong number, press [] or [] to
move the cursor to the incorrect number. Enter
the correct number.
4 Select “AM” or “PM” by pressing [].
5 Press [] (Save).
• If 3 beeps sound, the setting is not correct. Start again from step 3.
• The clock starts working.
6 Press [STOP].
If a power failure occurs, the time setting may be incorrect. When “” flashes
on the base unit display, adjust the date/time.
For Caller ID service users (p. 28)
• Caller ID information will reset the clock after the first ring if the adjusted time is
incorrect.
• If the time has not previously been set, the Caller ID information will not adjust
the clock.
• Caller ID information will automatically adjust the clock for daylight saving time.
Base Unit
Handset
Base Unit
▼
Date and time
▼
▼
Date:2003.12.31
Time:12:00 AM
0-9=Date&Time
=AM/PM
=Save
2
Date:2003.04.07
Time:09:30 AM
0-9=Date&Time
=AM/PM
=Save
AM
Handset
SA VE