Filter
Top Products
Using the Caller List
32
Storing Caller List Items in the Directory
Callers’ names and phone numbers that are in the base unit or cordless handset
Caller List can be stored in each unit’s directory.
• You cannot store Caller List items in the directory if a phone number is not displayed.
Erasing Caller List Items
To erase a specific item
1
Scroll to the desired caller by pressing [] or
[].
• If the number requires editing, see page 30.
2 Press [].
• To stop storing, press [].
3 Press [] again.
• If there is no name information for the caller, “Enter name” will be displayed.
–You can enter a name by performing the following steps:
(1) enter the name (p. 34), (2) press [], and (3) press [] (Save) on the
base unit or press the soft key ( ) on the cordless handset.
–If a name is not required, press [], then press [] (Save) on the base unit
or press the soft key ( ) on the cordless handset.
• To continue storing other items, repeat from step 1.
• To exit the programming mode, press [STOP] on the base unit. For the
cordless handset, press [OFF].
1 Scroll to the desired caller by
pressing [] or [].
2 Base unit: Press [ERASE].
Cordless handset:
Press [HOLD/CLEAR].
•“Clear” is displayed.
• To erase other items, repeat
from step 1.
• To exit the Caller List, press
[STOP] on the base unit.
For the cordless handset, press
[OFF].
Base Unit
Handset
TURNER,CINDY
1-555-456-7890
11:20A JAN.12 ×3
▼
▼
Save directory?
=No =Yes
▼
▼
SA VE
▼
SA VE
Base Unit Handset
T
o erase a
ll
i
tems
1
Press [] or [] to enter the
Caller List.
• Before erasing all items, make
sure that “0 new call” is
displayed.
2 Base unit: Press [ERASE].
Cordless handset:
Press [HOLD/CLEAR].
• To stop erasing, press [].
3
Base unit: Press [ERASE] again.
Cordless handset:
Press [HOLD/CLEAR] again.
•“All clear” is displayed and
all items in your Caller List are
erased.
▼