Filter
Top Products
26
Day and Time
Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
--------------
H
Save directory
Ringer volume
Ringer pattern
H
Program
--------------
--------------
H
TAD program
Set flash time
--------------
H
Day and time
Remote code
1
Press (FUNCTION/2WAY!REC).
2
Scroll to “Program” by pressing Ö or Ñ.
3
Press á.
4
Press á at “TAD program”.
5
Press á at “Day and time”.
•“Set time” is announced.
If previously adjusted, the day/time will be heard.
6
Enter the current time (hour and minute)
using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
7
Press (*) to select “AM” or “PM”.
Press (#) repeatedly to set the day.
8
Press á (Save key).
•The base unit announces the day/time. The clock
starts working.
•If 6 beeps sound from the base unit, the setting is
not correct. Start again from step 5.
•To exit the programming mode, press (OFF)
.
SUN 12:00 AM
#=Day 0-9=Time
=AM/PM
H
=Save
SUN 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
MON 09:30 AM
#=Day 0-9=Time
=AM/PM
H
=Save
Preparing the Answering System
•You can exit the programming mode any time by pressing (OFF).
MON 09:30 AM
Make sure the unit is not being used and the handset is lifted off the
base unit.