Filter
Top Products
25
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Programming Summary for Answering System
You can program the following functions using the handset near the
base unit. The display shows the programming instructions. See the
corresponding pages for function details.
Make sure the unit is not being used and the handset is lifted off the
base unit.
•“--------------” indicates the beginning or end of the function menu.
•You can exit the programming mode any time by pressing (OFF).
•If you do not press any buttons for 60 seconds, the unit will exit the programming
mode.
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try again.” is displayed.
Press (FUNCTION/2WAY!REC).
Scroll to “Program” by pressing Ö or Ñ, and press á.
When finished setting, press á (Save key).
•A beep sounds from the base unit.
•To exit the programming mode, press (OFF)
.
Press á at “TAD program”.
Select the desired function by pressing Ö or Ñ, and press á.
To adjust the day and time (p. 26).
To set the remote code (p. 63).
To select the number of rings (p. 29).
To select the caller’s recording time (p. 28).
--------------
H
Day and time
Remote code
Number of ring
Recording time
--------------